How to solve the continuous decline shared by hydraulic breaker manufacturers, let me tell you the reasons and how to deal with this problem.

Breaker is relying on hydraulic power unit to play the role of impact, hammering and crushing, and is widely used in mining, metallurgy, transportation, railway, tunnel and other industries. However, due to the characteristics of circuit breakers, there are always some minor faults during use, such as poor shock continuity. This is a common failure of hydraulic breakers in actual operation and use. This failure will seriously affect the working performance and safety of the circuit breaker. So, how to deal with the deterioration of the continuity of the breaker?

Cause 

1. The oil circuit of the breaker is blocked, resulting in no high-pressure oil in the oil circuit, and even poor permeability;

2. Breaker oil circuit failure, oil pipe connection error, insufficient pressure value, wrong direction of reversing valve, piston jamming, shut-off valve failure and other problems, will cause insufficient impact force or impact stagnation

3. The drill pipe of the large breaker is stuck, and the continuity and periodicity are affected, resulting in functional and stability problems.

Settle

Now that you know the reasons for the worsening of continuity, let me tell you how to deal with this question.

1. If the communication of the hydraulic breaker is poor, the oil circuit of the breaker should be checked immediately, and the blocked part should be cleaned or replaced in time.

2. Check the oil supply system of the hydraulic breaker, pay attention to the direction of the oil pipe interface, reversing valve, globe valve and piston;

3. To check and adjust the condition of the hydraulic breaker drill pipe, use a grinding wheel or oil stone to polish the problematic drill pipe. The above solutions, hope to help you. In addition, if you just have the needs or questions about hydraulic breaker, you are welcome to call us at any time!